Difference between revisions of "RepRap"
(→Materials) |
|||
| Line 1: | Line 1: | ||
<noinclude>{{backto|Rapid prototyping machines}}</noinclude> | <noinclude>{{backto|Rapid prototyping machines}}</noinclude> | ||
| − | [[Image: | + | [[Image:Reprap.jpg|thumb|RepRap 1.0 'Darwin']] |
[[Image:Extrusion of hexagon 2nd layer closeup.jpg|thumb|RepRap 0.1 building an object]] | [[Image:Extrusion of hexagon 2nd layer closeup.jpg|thumb|RepRap 0.1 building an object]] | ||
RepRap is rather special rapid prototyping machine. The name is short for self-'''rep'''licating '''rap'''id prototyper and the project was started at the University of Bath by Dr. Adrian Bowyer, a Senior Lecturer in mechanical engineering. | RepRap is rather special rapid prototyping machine. The name is short for self-'''rep'''licating '''rap'''id prototyper and the project was started at the University of Bath by Dr. Adrian Bowyer, a Senior Lecturer in mechanical engineering. | ||
Revision as of 10:20, 22 June 2007
RepRap is rather special rapid prototyping machine. The name is short for self-replicating rapid prototyper and the project was started at the University of Bath by Dr. Adrian Bowyer, a Senior Lecturer in mechanical engineering.
The idea is to create a rapid prototyping machine that, as well as being able to construct useful three dimensional objects to order, is also able to create most of the parts necessary to build another rapid prototyping machine. So for a very low cost, someone with a RepRap should be able to clone a new machine to give to someone else.
It uses the Fused Deposition Modelling (FDM) system of additive construction where a thermoplastic material is extruded very thinly from a computer controlled nozzle to slowly build up a three dimensional shape layer by layer.
However there are various of its own component parts that it cannot currently reproduce such as the stepper motor, microcontroller, extrusion nozzle and lubricant. However over time as the design evolves and becomes more sophisticated it is envisioned that there will be fewer and fewer parts that cannot be made by the machine itself.
Materials
The RepRap team intend to include nozzles for applying different materials during the build process:
- A thermoplastic - generally used to create structure of the object being made.
- Wood's or Field's metal which are low melting point metal alloys used to create electrical circuits within three dimensions in the artefact being built
- Ceramic slurry for hard and strong cement-like structure
- Silicone polymer used for gaskets, seals and flexible parts
- Plaster/cellulose mixes or icing sugar for temporary supports to support overhangs as the object is being built up. After the object is created these supports are easy to dissolve away using warm water
Open design
This is an Open design project in that everything relating to it – the schematics, 3D CAD models of the components and the software to run it – are being released under the GPL license which enables anyone to use, customize and evolve it. The terms of the GPL also mean that any improvements will likewise be available under the same license for others to benefit from.
External links
- RepRap project website
- RepRap article on Wikipedia
- 'Replication revolutionary', article from New Electronics, 29 December 2006 (pdf)
See also
- Fab@Home - another open-source rapid-prototyping machine
